A good plasterer makes the difference between walls and ceilings that look flawless under paint and ones that show every joint and screw line. For interior plastering, GIB fixing and stopping in New Plymouth, the quality of the finish comes down to preparation, patience and an experienced hand.
This page highlights the Top 5 plasterers in New Plymouth, based on independent research into reputation, finish quality (including Level 4 and Level 5 work), service and consistency.
The top 5 plasterers in New Plymouth are 1. Prime Plastering, 2. Superior Walls & Ceilings, 3. Boardworks, 4. TCM Ltd, 5. Creative Textures. Below we explain why each made the list, compare them at a glance, and share how to choose.
This featured position sits above the editorial Top 5 and is clearly labelled. It does not influence the rankings below.
Prime Plastering is a qualified New Plymouth team of GIB stoppers with more than 40 years combined experience, working on new homes, renovations and commercial builds Taranaki-wide.
Started in 1983, Superior Walls & Ceilings has over 200 years of combined experience and is Taranaki’s only GIB-approved fixing and stopping team, covering ornamental, residential and commercial work.
Boardworks has been trusted in Taranaki for over 40 years, offering residential GIB plasterboard supply, fixing and stopping for clean, paint-ready interiors.
TCM offers expert GIB stopping and plastering across New Plymouth and Taranaki, repairing damage and stopping new linings for paint-ready surfaces with consistent texture.
Creative Textures specialises in exterior plastering and painting for Taranaki’s residential and commercial clients, a good fit for plaster cladding and textured finishes.
A quick comparison of our Top 5 picks.
| Plasterer | Best for |
|---|---|
| Prime Plastering | High-standard GIB stopping |
| Superior Walls & Ceilings | Taranaki’s most experienced plasterers |
| Boardworks | Residential supply-fix-and-stop |
| TCM Ltd | Stopping and repairs with clean lines |
| Creative Textures | Exterior plaster cladding and finishes |
Independent, editorial, and reviewed regularly.
TopChoice rankings are editorially curated by our New Zealand team and reviewed periodically. We don't host our own reviews. Our shortlists draw on public reputation signals from Google and other platforms, alongside our own research into each plasterer. We weigh up a combination of:
We don't accept payment in exchange for a place in the Top 5. Featured placements are separate and always clearly labelled. Rankings may change over time as businesses evolve.
Interior plastering quality is easiest to judge after the painters arrive. Poor stopping shows up as visible joints, screw pops and uneven sheen, while good work disappears under the paint. When choosing a plasterer in New Plymouth, ask what finish level they are quoting (Level 4 is standard for most homes; Level 5 suits feature walls and glancing light).
For renovations and repairs, experience matching new plasterboard into existing walls and ceilings matters as much as the stopping itself. Always confirm whether plasterboard supply and fixing are included or just the stopping, and get the scope in writing before work begins.
Pricing depends on the area, the finish level and how much fixing, patching or repair is involved, so there is no single rate. Most New Plymouth plasterers quote per square metre or per room for stopping, with fixing priced separately. Get an itemised quote that states the finish level and whether plasterboard supply is included.
Level 4 is the standard finish for most New Plymouth homes and is fine under low-sheen paint in normal lighting. Level 5 adds a full skim coat over the whole surface for the smoothest result, worth it for feature walls, dark or gloss paint, and areas hit by glancing natural light.
Some do both fixing (hanging the GIB sheets) and stopping (taping and finishing the joints), while others only stop board fixed by your builder. Always confirm which service you are getting, as on a renovation it is common to have the builder fix and the plasterer stop.
Each coat of jointing compound needs to dry before the next, and cooler, damper conditions slow this down. Allow the final coat to cure fully, often a few days, before painting, and keep the room ventilated. A good plasterer will tell you when the surface is ready.
Yes. Repairing settlement cracks, water-damaged ceilings and holes is routine work for most plasterers. The key is matching the texture and finish of the surrounding surface so the repair disappears under paint, which experienced plasterers do far better than a DIY fill.
Sanding stopping compound creates fine dust, so a tidy plasterer will mask off doorways, protect floors and contain dust where possible. Ask up front how they manage dust and clean-up, especially if you are living in the house during a renovation.
Editorial disclosure: TopChoice is an independent editorial platform. Some pages may include clearly labelled featured placements for additional visibility. Featured placements do not influence rankings within our Top 5 lists.
Get in front of homeowners actively comparing plasterers and grow your business with TopChoice.
List Your Business